TIMELESS Linear is the coplanar window that meets the aesthetical and functioning needs of the modern house.
The perfect coplanarity between the window sash and the frame along with the special finishes make this product suitable for contemporary spaces.
Classic profile, with square glazing bead and linear sash, or elaborate profile.
External aluminum profile (mod. 5000/S) with color of your choice, modern and squared design.
In the wooden part it is realized by means of drilling holes in the lower part of the frame, while in the patio doors it is made of thermal break aluminum threshold.
The 70 mm thickness of the sash allows a joint between struts and crosspieces with triple tenon and dowels. Frames are also assembled using tenons with open cross-section and two and a half dowels. The external crosspieces are hollow so that struts never come into contact with water. Vinyl-based glues are used on the joints according to DIN 68602.
Performed in several phases: primer application by immersion with anti-mold and anti-parasitic treatment; double spray finishing with water-based ecological varnish.
Four foam gaskets: two thermal seal gaskets embedded in the window frame; one thermo-acoustic seal gasket embedded in the window sash and one in the aluminum profile.
AGB ARTECH 150 kg load capacity. The hardware provides high performance insulation and anti-burglary security.
AGB ARTECH portata 150 Kg, utilizzo di ferramenta antieffrazione con fungo autoregolante in acciaio su movimento angolare inferiore e angolo superiore, chiusura laterale sul retro per una maggiore sicurezza, rostro centrale a scomparsa e catenaccio verticale su anta secondaria.
Standard cover strips: external 3 x 0,8 cm – internal 5.5 x 1.2 cm.
UNI EN 1026:2016 + UNI EN 12207:2017
Air permeability and certification CLASS 4.
UNI EN 1027:2016 + UNI EN 12208:2000
Water tightness and classification CLASS 7A
UNI EN 12211:2016 + UNI EN 12210:2016
Wind resistance and classification CLASS C5
UNI EN 13049:2004
Impact resistance CLASS 3
UNI EN 14351-1:2016 – 4.8
Load-bearing capacity of safety devices: MET