Timeless 90

FRAME PROFILES
Classic profile, with square glazing bead and linear sash, or elaborate profile.

EXTERNAL COVERING
External aluminum profile (mod. 5000/S) with color of your choice, modern and squared design.

DRIP RAIL
In the wooden part it is realized by means of drilling holes in the lower part of the frame, while in the patio doors it is made of thermal break aluminum threshold.

ASSEMBLY
The 70 mm thickness of the sash allows a joint between struts and crosspieces with triple tenon and dowels. Frames are also assembled using tenons with open cross-section and two and a half dowels. The external crosspieces are hollow so that struts never come into contact with water. Vinyl-based glues are used on the joints according to DIN 68602.

FINISH
Performed in several phases: primer application by immersion with anti-mold and anti-parasitic treatment; double spray finishing with water-based ecological varnish.

GASKETS
Four foam gaskets: two thermal seal gaskets embedded in the window frame; one thermo-acoustic seal gasket embedded in the window sash and one in the aluminum profile.

HARDWARE
AGB ARTECH 150 kg load capacity. The hardware provides high performance insulation and anti-burglary security.

ANTA RIBALTA
AGB ARTECH portata 150 Kg, utilizzo di ferramenta antieffrazione con fungo autoregolante in acciaio su movimento angolare inferiore e angolo superiore, chiusura laterale sul retro per una maggiore sicurezza, rostro centrale a scomparsa e catenaccio verticale su anta secondaria.

COVER STRIPS
Standard cover strips: external 3 x 0,8 cm – internal 5.5 x 1.2 cm.